Products
Yucera dental CAD CAM dental glass ceramic block C14 Lt 18*13*15 lithium disilicate zirconia
Yucera dental CAD CAM dental glass ceramic block C14 Lt 18*13*15 lithium disilicate zirconia
Product advantages:
1. Excellent mechanical strength .The three-point bending strength is increased to 400±60 MPa, allowing CAD/CAM system to design with higher accuracy, reducing the processing difficulty of ultra-thin veneer and other restorations, and improving the strength and safety of materials seated in the Mouth.
2.Simulate the hardness of a natural tooth .Compared with other types of materials, the hardness of Cameo glass ceramics is closer to that of natural human teeth, which can reduce the excessive wear of the occlusion teeth caused by the hardness difference, and maintain the abrasion of the restorations and the surrounding teeth.
3.Overall fitness , easy to seat.The scientific nanosmicron crystallization structure provides better edge stability and structural accuracy for milling restoration, effectively simplifies the operation process of repeated seating and polishing, and realizes the efficient fitting of the technician’s processing and clinical seating teeth.
4.The clinical experience of instant restoration.As an all-ceramic material with a shrinkage ratio close to zero, it can provide great convenience for efficient design and digital processing, and provide you with ideal and comfortable instant diagnosis and treatment experience combined with the rapid crystallization process.
5.More intuitive transparency aesthetics.The product has HT (high transparency) and LT (low transparency)；HT (high transparency), good light transparency, restores the color and texture of natural abutment LT (low transparency), optional low light transparency, provides the healing effect of mask and complement.
complement：
| Coefficient of thermal expansion （25-500℃）[10-6/K] |
Three point bending strength[MPa] | Chemical solubility [μg/cm2] |
Density[g/cm3] |
| 10.5±0.5 | 400±60 | ≤40 | 2.47±0.05 |
calcining curve：
| The initial temperature |
The drying time | Heating rate | The highest temperature |
The highest temperature |
The final temperature |
| 450℃ | 4min | 40℃/min | 840℃ | 6min or 2min | 300℃ |
Specification:
•Color: VITA16, bleach white 4 (BL1/BL2/BL3/BL4)
•Size: 15.5*11*13; 18 * 13 * 15; 40 * 15 * 14
•Transparency: HT (high transparency) and LT (low transparency)
•Suitable for: a variety of mandrels to choose from, can match a variety of milling machines.
Indications:
